The following is from the Canadian Aviation and Space Museum's Website:
Highlights:
A Canadian three-seater, single-engine aircraft kit designed by Zenair Limited and produced from 1977 to 1999
Sold as a parts-only kit or in kits with some partially constructed components
Construction plans were sold to amateur builders until 1999; about forty-five Zenair CH-300s were still operating in Canada in 2011
CH-300 model had the option of three different engines and tricycle or tail-wheel configuration
Zenair was established in Canada in 1974 by French aeronautical engineer Christophe Heintz
Zenair designs won awards for efficiency and quality; the CH-200 was named Best New Design by the Experimental Aircraft Association in 1974
First flight was in April 1977
Artifact no.:
1984.0194
Manufacturer:
Zenair Ltd.
Manufacturer Location:
Canada
Manufacture Date:
1978
Registration no.:
C-GOVK
Acquisition Date:
1984
History:
The Zenair Company was established in Canada in the early 1970s to design and manufacture light airplane kits for the home builder. Zenair provided either parts-only kits or kits with some components partially constructed. The company has developed eight light airplane designs. The Models CH-200 and CH-300 won many awards for efficiency and quality during the late 1970s. The CH-300 buyer had a choice of three different engines, as well as a tricycle or tail-wheel configuration.
The Museum specimen was built for Robin (Red) Morris' record breaking, non-stop trans-Canada flight in 1978. The CH-300 was well equipped for the flight, with blind flying instruments, an autopilot and its fuel capacity increased from 127 litres (28 imp. gal.) to 773 litres (170 imp. gal.). A special seat was also installed for comfort. The trans-Canada flight was flown from west to east to take advantage of prevailing winds, which meant that the flight over the Rockies in the west would have to be tackled when the CH-300 weighed its heaviest. Despite strong headwinds near the Manitoba-Ontario border and the loss of the electrical generator, the 4 500-km (2 800-mile) flight was completed in the time of 22 hours, 43 minutes and 43 seconds.
Current Location:
Reserve Hangar, Canada Aviation and Space Museum
Provenance:
Purchase
The kit for this CH-300 was manufactured in 1978 by Zenair Limited in Richmond, Ontario. It was assembled by Robin "Red" Morris, with help from Gerry Boudreau and Doug Holtby, who worked at Zenair. The aircraft was completed in May 1978 and flown in Buttonville, Ontario the same month. After its initial flight, it was fitted with instrument flight equipment, an autopilot and auxiliary fuel tanks.
Morris completed an historic flight with this aircraft over July 1 and 2, 1978, flying non-stop from Vancouver to Halifax (4,450 kilometres [2,760 miles]) in 22 hours, 43 minutes and 43 seconds. This time set three world records for light aircraft. The flight was particularly daring as Morris flew west to east to take advantage of prevailing winds, which meant he flew over the Rockies when the aircraft was at its heaviest.
When the Museum purchased the CH-300 in 1984, Morris flew the aircraft from Toronto to Rockcliffe airport.
Technical Information:
Wing Span 8.1 m (26 ft 6 in)
Length 6.9 m (22 ft 6 in)
Height 2.1 m (6 ft 10 in)
Weight, Empty 517 kg (1,140 lb)
Weight, Gross 839 kg (1,850 lb)
Cruising Speed 246 km/h (153 mph)
Max Speed 274 km/h (170 mph)
Rate of Climb 427 m (1,400 ft) /min
Service Ceiling 3,048 m (10,000 ft)
Range 640 km (400 mi)
Power Plant one Lycoming 0-360-AFZ, 180 hp, horizontally-opposed engine
Reference: (
visit link)