Centrale du lac de Guerlédan, St Aignan / Mur de Bretagne - France
Posted by: Groundspeak Premium Member GwenanDu
N 48° 11.626 W 003° 01.116
30U E 498617 N 5337837
Centrale hydroélectrique dite barrage de Guerlédan en Bretagne /
Waymark Code: WM18078
Location: Bretagne, France
Date Posted: 05/01/2023
Published By:Groundspeak Premium Member fi67
Views: 2

Cette centrale est située sur 2 communes : Mur de Bretagne et St Aignan.

"Une centrale de lac :
Les centrales hydroélectriques de lac sont associées à une retenue artificielle. L’eau stockée dans la retenue provient soit d'une rivière ou d'un fleuve existant à l'origine (c'est le cas du Blavet, qui traverse la retenue), et de l'eau captée dans les bassins versants en amont de la retenue. Celle-ci est ensuite acheminée jusqu’aux turbines de la centrale en contrebas. Ces centrales sont activables rapidement, et capables de fournir d’importantes quantités d’énergie, appelées durant les heures de plus forte consommation et produisent une électricité à très forte valeur ajoutée. Elles sont un facteur d’ajustement pour répondre aux brusques variations de la demande, comme au moment des pics de consommation, le matin et le soir et dans les périodes de grand froid.

L'équipement de production
L'usine hydroélectrique est équipée de 4 turbines Francis, représentant au total, une puissance installée de 15 MW, pour une production de 20 GWh/an.

La turbine Francis tire son nom de l'ingénieur américain James Bicheno Francis, (1815-1892), qui l'a développée en 1848, aux États-Unis. L'eau arrive radialement par la volute en forme de spirale, sur le pourtour de la roue, pousse les aubes, puis sort axialement en s'écoulant ensuite, par le canal de fuite.

A Guerlédan, compte tenu de l'installation verticale des turbines, l'eau entre verticalement et en sort horizontalement. Chaque turbine est couplée à un alternateur triphasé, via un volant d'inertie.

La régulation :
Le volant d’inertie joue un rôle de stockage tampon d'énergie cinétique entre la production intermittente de la turbine et le réseau électrique, via l'alternateur. Dans une installation hydroélectrique, comprenant une turbine et un alternateur, celle-ci est soumise à une régulation automatique, la grandeur de sortie (grandeur réglée) doit être la plus proche possible de la valeur demandée (grandeur de consigne) soit une fréquence du courant de 50 Hz en France, et ceci malgré les diverses perturbations qui peuvent s'exercer sur elle.

Le rôle de la régulation est de maintenir la fréquence du réseau constante. Pour cela, le système de régulation agit sur le débit d'eau admis dans la turbine pour équilibrer la puissance fournie par la turbine et la puissance absorbée par le réseau, via l'alternateur. Ainsi, la régulation doit commander, les directrices (ou guide vannes), un organe de la machine capable de contrôler le débit d'eau entrant dans la turbine et ainsi de contrôler l'énergie transférée par l'eau à la turbine (processus d'asservissement).

Le bilan énergétique :
Le barrage est la quatrième source d'électricité de Bretagne et contribue ainsi à réduire le déficit énergétique de cette région. Un projet de STEP (station de transfert d'énergie par pompage) d'une puissance de 700 MW n'a pu aboutir, car le pompage journalier remontant l'eau dans un bassin supérieur de 60 mètres d'altitude aurait créé un marnage de 5 mètres dans le lac, sans compter que le barrage joue un rôle important en tant qu'écrêteur de crue." Source wiki : (visit link)

Plus d'informations : (visit link)

****************************

(EN) This plant is located in 2 municipalities: Mur de Bretagne and St Aignan.

"A lake power station:
Lake hydroelectric plants are associated with an artificial reservoir. The water stored in the reservoir comes either from an originally existing river (this is the case of the Blavet, which crosses the reservoir), and from the water captured in the catchment areas upstream restraint. This is then routed to the turbines of the plant below. These power plants can be activated quickly, and are capable of supplying large quantities of energy, called during the hours of greatest consumption, and produce electricity with very high added value. They are an adjustment factor for responding to sudden variations in demand, such as during peak consumption, in the morning and evening and during very cold periods.

production equipment
The hydroelectric plant is equipped with 4 Francis turbines, representing a total installed power of 15 MW, for a production of 20 GWh/year.

The Francis turbine takes its name from the American engineer James Bicheno Francis, (1815-1892), who developed it in 1848, in the United States. The water arrives radially via the volute in the form of a spiral, on the circumference of the wheel, pushes the blades, then exits axially while flowing then, by the tailrace.

In Guerlédan, given the vertical installation of the turbines, the water enters vertically and exits horizontally. Each turbine is coupled to a three-phase alternator, via a flywheel.

The regulation :
The flywheel plays a role of buffer storage of kinetic energy between the intermittent production of the turbine and the electrical network, via the alternator. In a hydroelectric installation, comprising a turbine and an alternator, the latter is subject to automatic regulation, the output quantity (regulated quantity) must be as close as possible to the requested value (setpoint quantity) i.e. a current frequency of 50 Hz in France, and this despite the various disturbances which can be exerted on it.

The role of regulation is to keep the network frequency constant. For this, the regulation system acts on the flow of water admitted into the turbine to balance the power supplied by the turbine and the power absorbed by the network, via the alternator. Thus, the regulation must control, the guidelines (or guide valves), a component of the machine capable of controlling the flow of water entering the turbine and thus of controlling the energy transferred by the water to the turbine (process of enslavement).

The energy balance:
The dam is the fourth source of electricity in Brittany and thus contributes to reducing the energy deficit of this region. A STEP project (pumped energy transfer station) with a power of 700 MW could not succeed, because the daily pumping up of the water in an upper basin 60 meters above sea level would have created a tidal range of 5 meters into the lake, not to mention that the dam plays an important role as a flood limiter." Source wiki: (visit link)

More information: (visit link)
Operational: yes

Type of power station: Conventional (dams)

Type of turbine: Francis

Operator: EDF

Visitor center: no

Date built: 10/26/1930

Generation capacity: 20 GWh/an

Visit Instructions:
For posting a log to an existing waymark, you will need to post a unique picture of the power station. If is not open to the public, please do not enter private property. A picture from the distance is sufficent. If it's possible to enter the machine hall, a picture of it would be nice. Please add some additional informations if possible.
Search for...
Geocaching.com Google Map
Google Maps
MapQuest
Bing Maps
Nearest Waymarks
Nearest Hydroelectric Power Stations
Nearest Geocaches
Create a scavenger hunt using this waymark as the center point
Recent Visits/Logs:
Date Logged Log  
GwenanDu visited Centrale du lac de Guerlédan, St Aignan / Mur de Bretagne - France 06/11/2023 GwenanDu visited it
geotrouvtou59 visited Centrale du lac de Guerlédan, St Aignan / Mur de Bretagne - France 05/12/2023 geotrouvtou59 visited it

View all visits/logs