Spooner Summit - Douglas County, NV
Posted by: Groundspeak Premium Member saopaulo1
N 39° 06.258 W 119° 53.742
11S E 249602 N 4332343
A sign about the Spooner Summit in Douglas County.
Waymark Code: WMYD2X
Location: Nevada, United States
Date Posted: 05/31/2018
Published By:Groundspeak Charter Member Uncle Alaska
Views: 8

"Toll Roads
Johnson's Cutoff, also called the Carson Ridge Emigrant Road, passed over Spooner Summit and down Clear Creek from 1852 through 1854, but was rugged and little used. With discovery of the Comstock Lode in 1859, Spooner Summit became a focal point on the most heavily traveled branch of the bonanza road system linking Placerville, California, and the new towns east of the Sierra Nevada. Territorial governments granted franchises to private individuals or companies, allowing them to build and maintain toll roads. The Rufus Walton (Clear Creek) Toll Road replaced Johnson's Cutoff in 1860, providing a better route around the southeast shore of Lake Tahoe via Glenbrook.

This route was improved in 1863 with completion of the Lake Tahoe (Bigler) Wagon Road, also called the Kings Canyon Road. About 5,000 teamsters were moving goods along roads leading to the Comstock in 1863, but traffic began to decline in 1875.

Stations were built at convenient intervals along the roads. Swift's Station was about two miles east of Spooner Summit on the Kings Canyon road. In 1863, Spooner's Station, located near the current junction of US 50 and SR 28 (a mile west of here), had a hotel, saloon, houses, blacksmith shop, and two barns.

Lumber for the Comstock
Massive amounts of wood were sent to the Comstock Lode from the Carson Range and the Tahoe Basin. Initially wood was hauled by wagon, Spooner Summit is in the midst of a former logging landscape. In 1873, logging in the area was consolidated by formation of the Carson and Tahoe Lumber and Fluming Company. Workers were housed at a small settlement called Summit Camp, built along one side of the toll road. From 1875 to 1898 the company operated the Lake Tahoe railroad along 8.75 miles of line from Glenbrook to this spot. The difficult route included switchbacks and a 487-foot tunnel just west of the summit. The narrow-gauge railroad's sole purpose was to haul timber and lumber for building purposes and cordwood for fuel. This wood was transferred to an 11-mile long V-flume that extended from Spooner Summit down Clear Creek to Carson Valley. There the wood was loaded on the Virginia and Truckee Railroad for the rest of its trip to the Comstock. At its peak the Comstock consumed about 80 million board feet of lumber and 2 million cords of firewood each year. About 300,000 board feet of wood passed over Spooner Summit each day.

Early Motoring
Introduction of automobiles into the Tahoe Basin rapidly changed the character of the place, making it accessible for far more people as a growing tourist destination. Early in the twentieth century, the decaying bonanza system of wagon roads had to serve the needs of automobile travelers.

In 1913, the Lincoln Highway Association designated the road up Kings Canyon, over Spooner Summit, and through Glenbrook as part of the Lincoln Highway. The highway was a private concept intended to enhance long-distance automobile travel by establishing the first transcontinental route. Actual work on this section began in 1914 when the Carson Good Roads Association placed redwood markers every mile. Each marker displayed the highway symbol and distances to Carson City, Glenbrook, and San Francisco. During this period one motorist described part of the road as "a narrow shelf along a barren, rocky mountain side."

Little more than light maintenance was done on the road even after it was included in the Nevada State Highway System as part of Route 3. In 1923, the portion of Route 3 between Spooner's Station and the state line was incorporated into the Forest highway System, making funding available for major improvements. In 1927 and 1928, a graded two-lane automobile road was built along Clear Creek, over Spooner Summit, and on to Glenbrook. A combination of state and Forest Highway funds paid for the work. The new road became part of US 50. In the 1930s, the road was oiled and surfaced with asphalt. Snow removal allowed year-round access to the lake. Finally, in the late 1950s, this portion of US 50 was upgraded to the present four lanes."
Marker Title (required): Spooner Summit

Marker Text (required):
"Toll Roads Johnson's Cutoff, also called the Carson Ridge Emigrant Road, passed over Spooner Summit and down Clear Creek from 1852 through 1854, but was rugged and little used. With discovery of the Comstock Lode in 1859, Spooner Summit became a focal point on the most heavily traveled branch of the bonanza road system linking Placerville, California, and the new towns east of the Sierra Nevada. Territorial governments granted franchises to private individuals or companies, allowing them to build and maintain toll roads. The Rufus Walton (Clear Creek) Toll Road replaced Johnson's Cutoff in 1860, providing a better route around the southeast shore of Lake Tahoe via Glenbrook. This route was improved in 1863 with completion of the Lake Tahoe (Bigler) Wagon Road, also called the Kings Canyon Road. About 5,000 teamsters were moving goods along roads leading to the Comstock in 1863, but traffic began to decline in 1875. Stations were built at convenient intervals along the roads. Swift's Station was about two miles east of Spooner Summit on the Kings Canyon road. In 1863, Spooner's Station, located near the current junction of US 50 and SR 28 (a mile west of here), had a hotel, saloon, houses, blacksmith shop, and two barns. Lumber for the Comstock Massive amounts of wood were sent to the Comstock Lode from the Carson Range and the Tahoe Basin. Initially wood was hauled by wagon, Spooner Summit is in the midst of a former logging landscape. In 1873, logging in the area was consolidated by formation of the Carson and Tahoe Lumber and Fluming Company. Workers were housed at a small settlement called Summit Camp, built along one side of the toll road. From 1875 to 1898 the company operated the Lake Tahoe railroad along 8.75 miles of line from Glenbrook to this spot. The difficult route included switchbacks and a 487-foot tunnel just west of the summit. The narrow-gauge railroad's sole purpose was to haul timber and lumber for building purposes and cordwood for fuel. This wood was transferred to an 11-mile long V-flume that extended from Spooner Summit down Clear Creek to Carson Valley. There the wood was loaded on the Virginia and Truckee Railroad for the rest of its trip to the Comstock. At its peak the Comstock consumed about 80 million board feet of lumber and 2 million cords of firewood each year. About 300,000 board feet of wood passed over Spooner Summit each day. Early Motoring Introduction of automobiles into the Tahoe Basin rapidly changed the character of the place, making it accessible for far more people as a growing tourist destination. Early in the twentieth century, the decaying bonanza system of wagon roads had to serve the needs of automobile travelers. In 1913, the Lincoln Highway Association designated the road up Kings Canyon, over Spooner Summit, and through Glenbrook as part of the Lincoln Highway. The highway was a private concept intended to enhance long-distance automobile travel by establishing the first transcontinental route. Actual work on this section began in 1914 when the Carson Good Roads Association placed redwood markers every mile. Each marker displayed the highway symbol and distances to Carson City, Glenbrook, and San Francisco. During this period one motorist described part of the road as "a narrow shelf along a barren, rocky mountain side." Little more than light maintenance was done on the road even after it was included in the Nevada State Highway System as part of Route 3. In 1923, the portion of Route 3 between Spooner's Station and the state line was incorporated into the Forest highway System, making funding available for major improvements. In 1927 and 1928, a graded two-lane automobile road was built along Clear Creek, over Spooner Summit, and on to Glenbrook. A combination of state and Forest Highway funds paid for the work. The new road became part of US 50. In the 1930s, the road was oiled and surfaced with asphalt. Snow removal allowed year-round access to the l


County (required): Douglas

Marker Type (required): Other (describe below)

Other Marker Type (optional): Mounted on boulder

Is Marker Damaged? (required): No

Marker Number (If official State Marker from NV SHPO website above, otherwise leave blank): Not Listed

Other Damage Type (optional): Not listed

URL - Website (optional): Not listed

Visit Instructions:
  • The marker must be visited in order to log a Waymark
  • Pictures are optional, however, if adding a picture try to include one of a different perspective (e.g. different angle/season/lighting etc.)
  • Add any personal experience or research information that would enhance the history of the marker.
  • Thanks!
Search for...
Geocaching.com Google Map
Google Maps
MapQuest
Bing Maps
Nearest Waymarks
Nearest Nevada Historical Markers
Nearest Geocaches
Create a scavenger hunt using this waymark as the center point
Recent Visits/Logs:
Date Logged Log User Rating  
SpeedCity visited Spooner Summit - Douglas County, NV 06/13/2021 SpeedCity visited it